IPS(PPH) THREADED PIPE AND FITTING

  • IPS PPH THREADED FITTING END CAP IIIPS(PPH) FEMALE CAP
    Read More
    Quick View

    IPS（PPH） THREADED FITTING END CAP

    Xing ying factory is IPS thread fittings manufacturers in China.PP – Homopolymer is produced by a continuous chain of polypropylene units which results in a high stiffness material.

  • IPS PPH THREADED FITTING FEMALE ADAPTOR IIPS(PPH) FEMALE CAP
    Read More
    Quick View

    IPS(PPH) THREADED FITTING FEMALE ADAPTOR

    IPS threaded fitting female adaptor is used to plug off a fitting in IPS pipe systems. IPS threaded fitting female adaptor is only designed to work with threaded fittings.IPS threaded fitting female adaptor is made with a threaded end so that they will work with any fitting in the IPS pipe systems.IPS threaded fitting female adaptor is pressure tested to meet all industry standard and can handle heat up to 140 degrees Fahrenheit.

     

  • IPS PPH THREADED FITTING FEMALE AND MALE BEND
    Read More
    Quick View

    IPS(PPH) THREADED FITTING FEMALE AND MALE BEND

    IPS threaded fitting female and male bend has female thread and male thread,it an be removed and replaced.It is used in two intersecting but not connected pipes. Its function is to facilitate the installation of disjoint pipes on the same horizontal plane.

  • IPS PPH THREADED FITTING FEMALE REDUCER SOCKET IIIPS(PPH) FEMALE REDUCER
    Read More
    Quick View

    IPS(PPH) THREADED FITTING FEMALE REDUCER SOCKET

    IPS threaded fitting female reducer socket Both sides are threaded to connect equipment or fittings.Most plastic pipework systems use a parallel type of BSP thread (often referred to as BSPP), that is to say the diameter of the thread remains the same for the entire length.

  • IPS(PPH) FEMALE REDUCER
    Read More
    Quick View

    IPS(PPH) THREADED FITTING FEMALE REDUCER SOCKET

    IPS threaded fitting female reducer socket Both sides are threaded to connect equipment or fittings.Most plastic pipework systems use a parallel type of BSP thread (often referred to as BSPP), that is to say the diameter of the thread remains the same for the entire length.

  • ips (pph) FEMALE TEE
    Read More
    Quick View

    IPS(PPH) THREADED FITTING FEMALE TEE

    IPS bsp threadable fitting female tee is a pipe fitting used to connect three threaded fittings of the same diameter to form a T shape.

  • IPS PPH THREADED FITTING FEMALE TEE (BRASS) II
    Read More
    Quick View

    IPS(PPH) THREADED FITTING FEMALE TEE (BRASS)

    IPS bsp threadable fitting female tee(brass) has a copper thread,It is used to connect copper tubes or threaded copper tubes or instruments.

     

  • IPS PPH THREADED FITTING FEMALE UNION Iips(pph) fitting UNION
    Read More
    Quick View

    IPS(PPH) THREADED FITTING FEMALE UNION

    IPS threaded fitting female union is used to connect two threaded pipe fittings of the same diameter, with a mechanism which allows them to be separated if necessary.

  • IPS(PPH) LONG NIPPLE
    Read More
    Quick View

    IPS(PPH) THREADED FITTING LONG NIPPLE

    IPS threaded fitting long nipple threaded on both ends and are used to connect to a threaded IPS pipe, fitting or valve of same diameter.

  • IPS(PPH) MALE PLUG
    Read More
    Quick View

    IPS(PPH) THREADED FITTING MALE PLUG

    IPS threaded fitting male plug is used to plug off a fitting in IPS pipe systems. IPS threaded fitting male plug is only designed to work with threaded fittings.IPS threaded fitting male plug is made with a threaded end so that they will work with any fitting in the IPS pipe systems.IPS threaded fitting male plug is pressure tested to meet all industry standard and can handle heat up to 140 degrees Fahrenheit.

  •
    Read More
    Quick View

    IPS(PPH) THREADED FITTING REDUCING ELBOW

    IPS threaded fitting reducing elbow has a socket,It can connect pph pipes or pph fittings with glue.

  • IPS(PPH) FITTING MALE REDUCER
    Read More
    Quick View

    IPS(PPH) THREADED FITTING REDUCING NIPPLE

    IPS threaded fitting reducing nipple threaded on both ends and are used to connect to a threaded IPS pipe, fitting or valve of different diameter.