PP COMPRESSION FITTINGS

  • PP Compression FITTING PLUG

    PP COMPRESSION FITTING PLUG

    PP compression fitting plug is designed to seal a length of Polyethylene (PE) pipe of the same diameter, which can be done simply and quickly without need for glueing or solvent welding.

  • PP COMPRESSION FITTING REDUCING COUPLING

    Xing ying PP Compression fitting reducing Couplings are made from the material polypropylene,we can supply 20mm o.d. to 110mm o.d.

    PP Compression fitting reducing Coupling is designed to connect two lengths of Polyethylene (PE) pipe together, with one diameter smaller than the other, which can be done simply and quickly without need for glueing or solvent weld.

    PP Compression fitting reducing Coupling nut locking for reliable jointing,one turn only to tighten the nut,installation without disassembling,suitable for PE and PEX pipes.

  • PP Compression FITTING REDUCING TEE

    PP COMPRESSION FITTING REDUCING TEE

    Xing ying PP Compression fitting reducing tee is made from the material polypropylene,we can supply 20mm o.d to 111mm o.d.

    PP Compression fitting reducing tee is designed to connect three lengths of Polyethylene (PE) pipe of different diameters to form an angle of 90 degrees, which can be done simply and quickly without need for glueing or solvent welding.

  • PP Compression FITTING TANK CONNECTOR

    PP COMPRESSION FITTING TANK CONNECTOR

    PP compression fitting tank connector can be installed on tank walls straight from the outside, does not need welding, sealants or locknut.
    Central Body of the joint. The threading allows for the necessary force so that the gasket can be joined to the wall.
    Gasket. Thanks to the patented variable shape of the diameter, it guarantees hydraulic sealing up to 4barFlat Ring. It allows for homogenous strength when tightening and serves as a buffer to reduce friction between nut and rubber on the gasket
    Ring. Its tightening through the threading makes it possible to shape the gasket adjusting it to the wall.

  • PP COMPRESSION FITTING TEE

    Xing ying PP Compression fitting tee is made from the material polypropylene,we can supply 20mm o.d to 111mm o.d.

    PP Compression fitting tee is designed to connect three lengths of Polyethylene (PE) pipe of the same diameter to form an angle of 90 degrees, which can be done simply and quickly without need for glueing or solvent welding.

  • PP COMPRESSION FITTING TRUE UNION BALL VALVE

    1. PP compression fitting ball valves are made of nuts (PP material), open cards (POM material), T-rings (PP material).
    The O-ring (rubber material), the main body of the valve core (PVC material), the handle (PP material) and other parts are composed. DesignScientific, strong firmness, good sealing.
    2. PP compression fitting ball valves enable a quick and easy insertion of the tube, Will not twist when pipe is inserted,so that the mounting times are reduced considerably, sufficient to loosen the nut (without actually removing it) and the tube can be inserted.
    3. It is suitable for various working conditions and widely used in gas, liquid, powder and other media.

  • PP COMPRESSION FITTING TUBE COUPLING

    pp compression fitting tube couplnig connects hose in a straight run,it have a barbed end that slides into semi-flexible plastic pipe and Fitting connects to hose on both ends and secures with a clamp.Since you don’t have to wait for cement to dry, they’re quicker to install than socket-connect fittings. Fittings are plastic for good corrosion resistance.

  • PP Compression FITTING TUBE MALE COUPLING

    PP COMPRESSION FITTING TUBE MALE COUPLING

    PP compression fitting tube male coupling threaded parts can be screwed into fittings or instruments and with a threaded end are also known as hose nipples.

    PP compression fitting tube male coupling has good corrosion and abrasion resistance, and are lighter in weight than metal barbed hose fittings. Slide the barbed end into plastic or rubber hose and secure with a clamp.

  • PP Compression FITTING TUBE TEE

    PP COMPRESSION FITTING TUBE TEE

    PP compression fitting tube tee can be in three directions Slide the barbed end into rubber hose and secure with a clamp or a crimp-on hose ferrule.

  • PP Compression FITTING UNION

    PP COMPRESSION FITTING UNION

    PP compression fitting union can quickly access hoses and fittings or equipment, installation is simple and fast, easy to disassemble and fast.

  • PP Compression FTITING DOUBLE UNION

    PP COMPRESSION FTITING DOUBLE UNION

    PP compression fitting double unions can make easy, reliable, leak-free connections. They have been developed to satisfy the compatibility needs for a wide range of applications and can be used on plastic or soft copper tubing. To make a connection, the tube is simply pushed in by hand; the unique Xing yin collet locking system holds the tubing firmly in place. Disconnection is just as easy and requires no special tools.

  • PP Compression FITTING DOUBLE UNION green

    PP COMPRESSION FTITING DOUBLE UNION

    PP compression fitting double unions can make easy, reliable, leak-free connections. They have been developed to satisfy the compatibility needs for a wide range of applications and can be used on plastic or soft copper tubing. To make a connection, the tube is simply pushed in by hand; the unique Xing yin collet locking system holds the tubing firmly in place. Disconnection is just as easy and requires no special tools.