Author - pvc pipe fitting

The difference between PPR pipe and PE pipe

The difference between PPR pipe and PE pipe PPR pipe and PE pipe can be used as drinking water pipes, here is to compare the advantages of the two kinds of pipe. In drinking water, PE generally do cold water pipe; PPR (special hot water material) can be used as hot water pipe. What want to say above all is PPR tube and PE to give conduit can serve as drinkable conduit, basically compare the superiority of two kinds of [...]

How to connect PE pipe to PPR pipe?

How to connect PE pipe and PPR pipe and melt them directly? What’s more, the specifications and models of the two pipes are the same? The PPR pipe and PE pipe should not be connected by hot melt. The PPR Female Adapter should be directly connected with the PPR Male Adapter. The wall thickness of PE tube is different from that of PP-R tube. The bonding strength of the two materials cannot meet the requirements. PE is connected with pp-r after [...]

Construction inspection of IPS(PPH) pipe and fittings welding

What inspection shall be carried out for the welding of IPS(PPH) pipe and fitting IPS(PPH) pipe and fittings hot melt socket welding construction inspection mainly for the appearance inspection, including the following: 1. Whether the socket and socket are aligned; 2. Whether the extruded molten material between socket and socket is consistent on the whole outer circumference; 3. Peel off the contact surface and observe whether there are impurities, shrinkage holes, cracks or other injuries in the welding area; 4. Observe whether there are [...]

3 step hot welding of IPS(PPH) pipes and fittings

3 step hot welding of IPS(PPH) pipes and fittings 1. Welding machines and tools IPS(PPH) pipe and fittings welding for hot welding, using various specifications of hydraulic or manual plastic pipe hot welding machine. Taking the hot-melt welding machine of hydraulic plastic pipe as an example, welding is mainly divided into three parts: welding control platform, welding operation platform and tool placement rack. 2. Prepare for welding For the pipe cutter (pipe cutter), acetone and clean cloth matching the IPS(PPH) pipe model, the [...]

How to distinguish PVC drain pipe quality?

How to distinguish PVC drain pipe quality? Distinguish PVC drainage pipe quality is good or bad a total of three points: 1. choose and buy PVC drain pipe, the color is even, the inside and outside wall is smooth have toughness to feel had better, the PVC drain pipe color that almost is either snow-white, or some yellow, texture is harder, color is uneven, some outside wall is smooth, the inner wall is coarse, have needle or small hole. 2.PVC drainage pipe [...]

PE-drip-pipe

What should be paid attention to during the installation of drip irrigation pipe?

What should be paid attention to during the installation of drip irrigation pipe? drip irrigation pipe another name is Garden Hose pipe. Drip irrigation pipe is an important irrigator in the drip irrigation system. According to the water demand of crops, through the low-pressure pipe system and the irrigator installed on the capillary, the water and the nutrients needed by crops are dropped into the soil of crop root area evenly and slowly. The following is the summary of water-saving irrigation equipment, [...]

PE-drip-pipe

How to solve the blockage of PE drip pipe?

How to solve the blockage of PE drip pipe? 1、 After the installation of PE drip irrigation pipe for each crop of vegetables, the impurities in the pipe shall be washed first to remove the potential blockage; after the seedling is pulled for each crop of vegetables, the PE drip irrigation pipe shall be washed clean in time and well coiled for collection, so as to prevent the soil and impurities from depositing near the dripper and solidifying and blocking [...]

all-kinds-of-pvc-pipe-fitting

How to improve the hardness of PVC pipes and fittings?

How to improve the hardness of PVC pipes and fittings? 1、 How to improve the hardness of PVC pipes and fittings? 1. The plasticization of PVC pipes and fittings must be high, and the plasticization should be as high as possible. As long as the decomposition does not change color, the plasticization can be properly improved, making the relative high point of the material’s dilute softness. 2. The cutting pressure of PVC pipes and pipe fittings should be placed at the die [...]

pvc-pipe-fitting

How to construct PVC pipe fittings in high temperature weather

How to construct PVC pipe fittings in high temperature weather? Today, PVC pipe fitting manufacturer and supplier tell you the construction essentials of PVC pipes and pipe fittings in high temperature weather, mainly including the following points. 1. There is a lot of rain in summer. When the construction is completed, it should be backfilled in time to prevent the collapse of the pipe trench from affecting the normal construction and damaging the PVC pipes and fittings, causing unnecessary trouble. In [...]

ppr-pipe-and-fitting

Why PPR pipes and fittings are brittle at low temperature

Why PPR pipes and fittings are brittle at low temperature? PPR pipes and pipe fittings are brittle at low temperature, and will break under external impact or heavy pressure. So what are the causes of this and how can we prevent it? 1. What is low temperature brittleness? The impact absorption energy of materials (all materials, including metal materials and non-metal materials) decreases with the decrease of temperature. When the test temperature is lower than TK (critical transition temperature of toughness [...]