In plumbing engineering, these ppr accessories are indispensable.
When using PPR pipes in plumbing engineering, what accessories are needed?
1. ppr elbow
In plumbing engineering, PPR pipes need to be used when the direction of the pipe needs to be changed. The size of the ppr elbow should be matched with the PPR pipe. If it does not match, the welding will definitely not be firm. As soon as water flows, it leaks. However, for PPR pipelines in pipeline engineering, the fewer joints the better. The more joints, the greater the risk of water leakage.
2. ppr tee
In plumbing engineering, PPR pipes also use three links. The function of the ppr tee is to divert the water flow. For example, one water flow needs to be divided into two directions, and three PPR pipes are connected by ppr tee fittings. When welding, the technical requirements of the water master are high, and the three outlets of the tee must be tightly welded.
3. ppr coupling
In pipeline engineering, when the length of PPR pipe is not enough, PPR can be used for direct connection. However, the direct quantity should not be too much, otherwise, it will be troublesome to repair and even need to be replaced with new pipes. However, it is also not possible to blindly save pipes and directly weld a lot of PPR coupling, which not only troubles construction, wastes time, but also increases the hidden danger of water leakage.
4. ppr pipe clamp
ppr fitting clamp
PPR pipes in plumbing engineering should be fixed by pipe clamps. The distance to fix the PPR pipe clamp is related to many factors, such as the diameter of the pipe, the water pressure, and so on. However, the more pipe clamps are not the better. Too many pipe clamps waste materials, and it is unnecessary. Too few pipe clamps make the pipes easy to fall off the slope, and they are easy to be damaged in windy weather.
5. ppr ball valve
In landscaping PPR pipelines, various ppr ball valves and ppr stop valves are also needed. For example, the main valve, check valve, etc. of a section of pipeline. In each place, the corresponding valve must be used to control the pipeline in the entire pipeline project.
