PPR FITTING

  • PPR FITTING OVER BEND

    Ppr fitting over bend is used in two intersecting but not connected pipes. Its function is to facilitate the installation of disjoint pipes on the same horizontal plane.

    Ppr fitting over bend has good hot-melting performance. PPR pipe and PPR pipe fittings of the same material are connected into a whole through hot-melt connection, and water will never leak. The inner and outer walls of PPR fitting 45 degree elbow are smooth, the fluid resistance is small, the weight is light, and the transportation and installation are convenient. Low temperature and high pressure resistance, low temperature – 10 degrees Celsius. Apart from a few oxidizers, PPR fittings can resist multiple chemical media erosion, no corrosion, no bacteria, and avoid blockage after scaling. PPR pipeline system can be used for a long time at 70 C and 1.0 Mpa working pressure. Its service life can reach 50 years.

  • PPR FITTING OVER BEND

    Ppr fitting over bend is used in two intersecting but not connected pipes. Its function is to facilitate the installation of disjoint pipes on the same horizontal plane.

    Ppr fitting over bend has good hot-melting performance. PPR pipe and PPR pipe fittings of the same material are connected into a whole through hot-melt connection, and water will never leak. The inner and outer walls of PPR fitting 45 degree elbow are smooth, the fluid resistance is small, the weight is light, and the transportation and installation are convenient. Low temperature and high pressure resistance, low temperature – 10 degrees Celsius. Apart from a few oxidizers, PPR fittings can resist multiple chemical media erosion, no corrosion, no bacteria, and avoid blockage after scaling. PPR pipeline system can be used for a long time at 70 C and 1.0 Mpa working pressure. Its service life can reach 50 years.

  • PPR FITTING REDUCING COUPLING

    The length of PPR pipe is limited (each PPR pipe produced by conventional PPR pipe manufacturer is 4 meters long), so it is necessary to use PPR fitting reducing coupling to connect. It is directly used to connect different size ppr pipe.

  • PPR FITTING REDUCING ELBOW

    PPR FITTING REDUCING ELBOW

    Ppr fitting reducing elbow joint has the different diameter at both ends. It is used to connect pipes with the different diameter. It is used in places with more corners and when the direction of pipes needs to be changed.

  • PPR FITTING REDUCING TEE

    PPR FITTING REDUCING TEE

    Ppr fitting reducing tee can connect water pipes in different directions. It connects different size ppr pipe.It diverts and changes the direction of the water channel.

    Ppr fitting reducing tee has good hot-melting performance. PPR pipe and PPR pipe fittings of the same material are connected into a whole through hot-melt connection, and water will never leak.Ppr fitting reducing tee are made by injection moulding on automatic precision injection moulding machine, including vacuum suction, feeding, screw heating, shearing plasticization, injection, pressure-holding cooling, open-die demoulding, corner trimming, inspection, automatic weighing and other projects.

    Ppr pipe and fitting the field of application of the production:
    Pipeline system of residential hot or cold water,Transportation and discharge of water for industrial use or chemical species, Pipeline system of pure water or drinking water,Procreative and conveying system of soft drink and mediation,Pipeline system for pressure air,Heating systems in buildings, including floors,panels and radiation heating systems,Other pipeline system for industry agriculture

  • PPR FITTING STOP VALVE AMODLE

    PPR FITTING STOP VALVE

    The opening and closing parts of the ppr fitting stop valve is plug-shaped discs with flat or conical sealing surfaces. The disc moves in a straight line along the center line of the fluid. The movement of the valve stem is in the form of lifting rod (stem lifting, hand wheel not lifting), and lifting rotating rod (hand wheel and stem rotating lifting together, nuts set on the valve body).

    Globe valves are only suitable for all openings and closures, and are not allowed to be regulated or throttled.

  • PPR FITTING STOP VALVE BMODLE

    PPR FITTING STOP VALVE

    The opening and closing parts of the ppr fitting stop valve is plug-shaped discs with flat or conical sealing surfaces. The disc moves in a straight line along the center line of the fluid. The movement of the valve stem is in the form of lifting rod (stem lifting, hand wheel not lifting), and lifting rotating rod (hand wheel and stem rotating lifting together, nuts set on the valve body).

    Globe valves are only suitable for all openings and closures, and are not allowed to be regulated or throttled.

  • PPR FITTING STOP VALVE CMODLE

    PPR FITTING STOP VALVE

    The opening and closing parts of the ppr fitting stop valve is plug-shaped discs with flat or conical sealing surfaces. The disc moves in a straight line along the center line of the fluid. The movement of the valve stem is in the form of lifting rod (stem lifting, hand wheel not lifting), and lifting rotating rod (hand wheel and stem rotating lifting together, nuts set on the valve body).

    Globe valves are only suitable for all openings and closures, and are not allowed to be regulated or throttled.

  • PPR FITTING STOP VALVE DMODLE

    PPR FITTING STOP VALVE

    The opening and closing parts of the ppr fitting stop valve is plug-shaped discs with flat or conical sealing surfaces. The disc moves in a straight line along the center line of the fluid. The movement of the valve stem is in the form of lifting rod (stem lifting, hand wheel not lifting), and lifting rotating rod (hand wheel and stem rotating lifting together, nuts set on the valve body).

    Globe valves are only suitable for all openings and closures, and are not allowed to be regulated or throttled.

  • PPR FITTING STOP VALVE

    PPR FITTING STOP VALVE

    The opening and closing parts of the ppr fitting stop valve is plug-shaped discs with flat or conical sealing surfaces. The disc moves in a straight line along the center line of the fluid. The movement of the valve stem is in the form of lifting rod (stem lifting, hand wheel not lifting), and lifting rotating rod (hand wheel and stem rotating lifting together, nuts set on the valve body).

    Globe valves are only suitable for all openings and closures, and are not allowed to be regulated or throttled.

  • PPR FITTING UNION

    PPR FITTING UNION

    PPR fitting union can be installed and screwed at will. It can be used in the inconvenient fixed connection position at both ends. It can be disassembled at any time when the position needs to be changed from time to time.

Online Service
Live Chat