
125mm pvc gutter Square tee
trench that collects rainwater from the roof,Connects Square rain gutter to square downspou.Do Not Cement.Works exclusively with Square rain gutter.
- Description
- Inquiry
Related Products
-
Read MoreQuick View
125mm pvc gutter Square rain gutter
connect the organization to guide rain water bucket down the drain.
-
Read MoreQuick View
SCHEDULE 40 PVC DWV FITTING TEE (ASTM D2665)
Schedule 40 pvc DWV fitting Tees as they are sometimes called are used in drainage applications where a branch is needed off of the main drain line in the piping system. This tee fitting is used in DWV applications with all HUB ends.Sanitary tees have a sweep in the branch of the tee that allow for fluid movement to stay clean and steady and aid in the evacuation of waste and used fluids without any obstructions in the piping system.
-
Read MoreQuick View
125mm pvc gutter 45 deg square elbow
Works exclusively with our PVC round downpipe.Two elbows required to bring downspout to wall.Third elbow may be used at bottom.
-
Read MoreQuick View
CPVC DIN FITTING TEE
Cpvc din fitting tee features female socket connections and allows for a connection to be made in continuous pipeline and branch out to a different direction.Installation requires use of CPVC solvent cement.Cpvc din fitting tee is cost effective and will not rust, scale or pit.
-
Read MoreQuick View
125mm pvc gutter Square clamp
for the rainwater pipe fixed to the wall of the fixed component
-
Read MoreQuick View
SCHEDULE 40 PVC DWV FITTING VENT TEE (ASTM D2665)
Schedule 40 pvc DWV fitting vent Tees as they are sometimes called are used in drainage applications where a branch is needed off of the main drain line in the piping system. This tee fitting is used in DWV applications with all HUB ends.Sanitary tees have a sweep in the branch of the tee that allow for fluid movement to stay clean and steady and aid in the evacuation of waste and used fluids without any obstructions in the piping system,and the abrupt 90-degree angle on the outlet is used to change the direction of flow in the venting side of the system.
-
Read MoreQuick View
SCHEDULE 80 CPVC FITTING EQUAL TEE
Schedule 80 CPVC fitting tee features socket connections and exhibits high corrosion and chemical resistance properties.It is used to connect three pipes of the same size and change their direction.
-
Read MoreQuick View
125mm pvc gutter Square elbow
gutter joiner and gutter connections,Fits two section of pvc rain gutter half round at an external corner or Connects two gutter sections at a 90 degree inside corner.Snap fit design makes installation a breeze.Apply Vinyl cement to seal joins.
-
Read MoreQuick View
SCHEDULE 40 PVC DWV FITTING SANITARY TEE (ASTM D2665)
Schedule 40 pvc DWV fitting sanitary Tees as they are sometimes called are used in drainage applications where a branch is needed off of the main drain line in the piping system. This tee fitting is used in DWV applications with all HUB ends.Sanitary tees have a sweep in the branch of the tee that allow for fluid movement to stay clean and steady and aid in the evacuation of waste and used fluids without any obstructions in the piping system.
-
Read MoreQuick View
Sch40 Pvc Fitting Tee
Schedule 40 PVC fitting tee features female socket connections and is used to allow for a connection to be made in a continuous pipeline and branch out to a different direction.Schedule 40 PVC fitting tees allow a line to be split into two lines with a connection that is at a 90-degree angle. It can also be used to connect two lines into one main line when mixing chemicals. This versatility makes it one of the most commonly used types of fittings in plumbing.