
PP COMPRESSION FITTING PLUG
PP compression fitting plug is designed to seal a length of Polyethylene (PE) pipe of the same diameter, which can be done simply and quickly without need for glueing or solvent welding.
- Description
- Inquiry
Related Products
-
Read MoreQuick View
PP COMPRESSION FITTING COUPLING
Xing ying PP Compression Couplings are made from the material polypropylene,we can supply 20mm o.d. to 110mm o.d.
PP Compression Coupling is designed to connect two lengths of Polyethylene (PE) pipe of the same diameter together, which can be done simply and quickly without need for glueing or solvent welding.
-
Read MoreQuick View
PP COMPRESSION FITTING MALE THREAD ELBOW
Xing ying PP Compression fitting male thread elbow is made from the material polypropylene,we can supply 20mm o.d to 110mm o.d.
PP Compression fitting male thread elbow is designed to connect a length of Polyethylene (PE) pipe to a BSP female thread, which can be done simply and quickly without need for glueing or solvent welding.
-
Read MoreQuick View
PP COMPRESSION FITTING FLANGE
PP compression fitting flange can easily be fixed on a wall throught the wall plate at its back.
Excellent performance under pressure,Suitable for underground cold water systems,Highly impact-resistant nut and body absorb high levels of thermal and mechanical stress,Simple and quick to connect and disconnect,Always use with pipe inserts.
PP compression fitting flange is not suitable for use with hot water for the limits dictated by the use of polyethylene pipes.
-
Read MoreQuick View
PP COMPRESSION FITTING UNION
PP compression fitting union can quickly access hoses and fittings or equipment, installation is simple and fast, easy to disassemble and fast.
-
Read MoreQuick View
PP COMPRESSION FITTING FEMALE THREAD ELBOW
Xing ying PP Compression fitting female elbow is made from the material polypropylene,we can supply 20mm o.d to 110mm o.d.PP Compression fitting female elbow is designed to connect a length of Polyethylene (PE) pipe to a BSP male threaded fitting, which can be done simply and quickly without need for glueing or solvent welding, with certain sizes offering a stainless steel reinforced ring for extra durability.
-
Read MoreQuick View
PP COMPRESSION FITTING TEE
Xing ying PP Compression fitting tee is made from the material polypropylene,we can supply 20mm o.d to 111mm o.d.
PP Compression fitting tee is designed to connect three lengths of Polyethylene (PE) pipe of the same diameter to form an angle of 90 degrees, which can be done simply and quickly without need for glueing or solvent welding.
-
Read MoreQuick View
PP COMPRESSION FITTING TUBE TEE
PP compression fitting tube tee can be in three directions Slide the barbed end into rubber hose and secure with a clamp or a crimp-on hose ferrule.
-
Read MoreQuick View
PP COMPRESSION FITTING TUBE COUPLING
pp compression fitting tube couplnig connects hose in a straight run,it have a barbed end that slides into semi-flexible plastic pipe and Fitting connects to hose on both ends and secures with a clamp.Since you don’t have to wait for cement to dry, they’re quicker to install than socket-connect fittings. Fittings are plastic for good corrosion resistance.
-
Read MoreQuick View
PP COMPRESSION FITTING ELBOW WALL PLATE
PP compression fitting elbow wall plate can easily be fixed on a wall throught the wall plate at its back.
Excellent performance under pressure,Suitable for underground cold water systems,Highly impact-resistant nut and body absorb high levels of thermal and mechanical stress,Simple and quick to connect and disconnect,Always use with pipe inserts.
PP compression fitting elbow wall plate is not suitable for use with hot water for the limits dictated by the use of polyethylene pipes.
-
Read MoreQuick View
PP COMPRESSION FITTING 90 DEG ELBOW
Xing ying PP Compression fitting 90 deg elbow is made from the material polypropylene,we can supply 20mm o.d to 110mm o.d.
PP Compression fitting 90 deg elbow is designed to connect one length of Polyethylene (PE) pipe to another at an angle of 90 degrees, which can be done simply and quickly without need for glueing or solvent welding.PP Compression fitting female adaptor is designed to connect a length of Polyethylene (PE) pipe to a BSP male thread, which can be done simply and quickly without need for glueing or solvent welding, with certain sizes offering a stainless steel reinforced ring for extra durability.