IPS THREADED PIPE AND FITTING

IPS THREADED PIPE AND FITTING

  • IPS THREADED FITTING 45 DEG ELBOW

    Xing ying factory is IPS threaded fittings manufacturers in China.PP – Homopolymer is produced by a continuous chain of polypropylene units which results in a high stiffness material.

    IPS threaded fitting 45 deg elbow can connect pipes or fittings or equipment to change direction of flow or direction of pipes.It uses threads to connect pipes or fittings.Our IPS Threaded System has all the advantages of a traditional plumbing system, combined with modern technology to ensure a leak-free solution.

    More dense than PPR fittings, this material provides threads with the necessary rigidity to maintain a water tight seal.

  • IPS PPH THREADED FITTING ELBOW 45 deg

    IPS THREADED FITTING 45 DEG ELBOW

    Xing ying factory is ips threaded fittings manufacturers in China.PP – Homopolymer is produced by a continuous chain of polypropylene units which results in a high stiffness material.

    IPS threaded fitting 45 deg elbow can connect pipes or fittings or equipment to change direction of flow or direction of pipes.It uses threads to connect pipes or fittings.Our IPS Threaded System has all the advantages of a traditional plumbing system, combined with modern technology to ensure a leak-free solution.

    More dense than PPR fittings, this material provides threads with the necessary rigidity to maintain a water tight seal.

  • IPS PPH THREADED FITTING 90 DEG ELBOW I

    IPS THREADED FITTING 90 DEG ELBOW

    IPS threaded fitting 90 deg elbow can connect pipes or fittings or equipment to change direction of flow or direction of pipes.It uses threads to connect pipes or fittings.Our IPS Threaded System has all the advantages of a traditional plumbing system, combined with modern technology to ensure a leak-free solution.

  • IPS PPH THREADED FITTING 90 DEG ELBOW II

    IPS THREADED FITTING 90 DEG ELBOW

    IPS threaded fitting 90 deg elbow can connect pipes or fittings or equipment to change direction of flow or direction of pipes.It uses threads to connect pipes or fittings.Our IPS Threaded System has all the advantages of a traditional plumbing system, combined with modern technology to ensure a leak-free solution.

  • IPS PPH THREADED FITTING 90 DEG ELBOW (BRASS) II

    IPS THREADED FITTING 90 DEG ELBOW (BRASS)

    IPS threaded fitting 90 deg elbow has a brass,top choice for hot and cold water systems.It is used to connect copper pipes or threaded copper fittings.This elbow will not rust, pit or scale.

  • IPS PPH THREADED FITTING BEND

    IPS THREADED FITTING BEND

    IPS threaded fitting bend is used in two intersecting but not connected pipes. Its function is to facilitate the installation of disjoint pipes on the same horizontal plane.

  • IPS PPH THREADED FITTING COUPLING II

    IPS THREADED FITTING COUPLING

    IPS threaded fitting coupling Both sides are threaded to connect equipment or fittings.Most plastic pipework systems use a parallel type of BSP thread (often referred to as BSPP), that is to say the diameter of the thread remains the same for the entire length. It is directly used to connect IPS pipes of the same diameter.The length of PPR pipe is limited (each IPS pipe produced by conventional IPS pipe manufacturer is 4 meters long), so it is necessary to use IPS threaded fitting coupling to connect. It is directly used to connect ppr pipes of the same diameter.

  • IPS PPH THREADED FITTING FEMALE COUPLING I

    IPS THREADED FITTING COUPLING

    IPS threaded fitting coupling Both sides are threaded to connect equipment or fittings.Most plastic pipework systems use a parallel type of BSP thread (often referred to as BSPP), that is to say the diameter of the thread remains the same for the entire length. It is directly used to connect pph pipes of the same diameter.The length of PPR pipe is limited (each IPS pipe produced by conventional IPS pipe manufacturer is 4 meters long), so it is necessary to use IPS fitting coupling to connect. It is directly used to connect ppr pipes of the same diameter.

  • IPS PPH THREADED FITTING FEMALE COUPLING (BRASS) II

    IPS THREADED FITTING COUPLING(BRASS)

    IPS threaded fitting coupling Both sides are threaded to connect equipment or fittings.Most plastic pipework systems use a parallel type of BSP thread (often referred to as BSPP), that is to say the diameter of the thread remains the same for the entire length. It is directly used to connect pph pipes of the same diameter.The length of PPR pipe is limited (each IPS pipe produced by conventional IPS pipe manufacturer is 4 meters long), so it is necessary to use IPS threaded fitting coupling to connect. It is directly used to connect ppr pipes of the same diameter.

  • IPS PPH THREADED FITTING END CAP II

    IPS THREADED FITTING END CAP

    Xing ying factory is IPS thread fittings manufacturers in China.PP – Homopolymer is produced by a continuous chain of polypropylene units which results in a high stiffness material.

  • IPS PPH THREADED FITTING FEMALE ADAPTOR I

    IPS THREADED FITTING FEMALE ADAPTOR

    IPS threaded fitting female adaptor is used to plug off a fitting in IPS pipe systems. IPS threaded fitting female adaptor is only designed to work with threaded fittings.IPS threaded fitting female adaptor is made with a threaded end so that they will work with any fitting in the IPS pipe systems.IPS threaded fitting female adaptor is pressure tested to meet all industry standard and can handle heat up to 140 degrees Fahrenheit.

     

  • IPS PPH THREADED FITTING FEMALE AND MALE BEND

    IPS THREADED FITTING FEMALE AND MALE BEND

    IPS threaded fitting female and male bend has female thread and male thread,it an be removed and replaced.It is used in two intersecting but not connected pipes. Its function is to facilitate the installation of disjoint pipes on the same horizontal plane.