• Home
  • Search - ppr elbow

Search Results - ppr elbow

PPR-PIPE-AND-FITTING
16 Mar

The heavier the PPR fitting, the better?

The heavier the PPR fitting, the better? In engineering and home decoration, is the quality of PPR pipe fitting as heavy as possible? We all know that the price of pipe is much cheaper than that of pipe fittings, so how to choose the most cost-effective PPR pipe fittings? Now PPR tube manufacturers will answer for you one by one. PPR pipe fittings mainly include ppr fitting elbows,ppr fitting coupling,ppr fitting cross,ppr fitting clamps, ppr fitting bend over, ppr fitting flange [...]

By Read more...
ppr-pipe-and-fitting
13 Mar

What meaning does S5 and S4 represent on PPR pipe

1. What meaning does S5 and S4 represent on PPR pipe? PPR pipes are divided into five series of S5, S4, S3.2, S2.5 and S2, and the corresponding pressure classes are different according to the total utilization coefficient C of the pipeline system: When C=1.25, corresponding nominal pressure 1.25,1.6,2.0,2.5,3.2MPa; When C=1.5, it corresponds to the nominal pressure of 1.0,1.25,1.6,2.0 and 2.5MPa respectively. These five series of cold and hot water pipes can be used, but as a result of PPR pipe in the [...]

By Read more...
PPR-FITTING
04 Nov

What are the most commonly used PPR pipe fittings?

What are the most commonly used PPR pipe fittings? 1 ppr pipe diameter introduction PPR pipe standard GB / T18742 stipulates that there are ten specifications of PPR pipe outer diameter: 20, 25, 32, 40, 50, 63, 75, 90, 110, 160 (unit: mm). Generally, three specifications of 20, 25, 32 are enough for home decoration. S3.2 and s2.5 hot water pipes are domestic hot water pipes, with PPR standard type and PPR type. If they are used for heating, standard PPR can [...]

By Read more...
24 Oct

What kind of connection is adopted for PPR pipe fittings to prevent water leakage?

What kind of connection is adopted for PPR pipe fittings to prevent water leakage? Now PPR pipe fittings are widely used in the domestic water supply system, usually in the way of concealed installation, in case of water leakage, maintenance is more difficult. So what kind of connection is adopted for PPR pipe to prevent water leakage? Corresponding to different requirements, PPR pipe fittings are welded, hot-melt and threaded. PPR pipe fittings are the most reliable with hot-melt connection, convenient operation, good [...]

By Read more...
19 Aug

PVC DIN FITTING 45 DEG ELBOW

pvc din fitting 45 deg elbow is a pipe fitting used to connect two pieces of pipe of the same diameter to create an angle of 45 degrees. PVC-U MM sized fittings are available in sizes from 20mm to 250mm and in a choice of pressure ratings from 6 Bar to 16 bar. Manufactured in accordance with EN1452/2 and DIN 8063 all fittings are WRAS approved for use with potable water.

By Read more...
19 Aug

PVC DIN FITTING FEMALE ELBOW(COPPER THREAD)

pvc din fitting female elbow(copper thread) composed under the master supervision and are furnished with smooth edges and slick completing that assistance in successful execution at the clients’ end.This Elbow comes with brass threading side , is a pipe fitting installed between two lengths of pipes to change the direction of pipe line.

By Read more...
PVC FITTING FEMALE ELBOW DIN
19 Aug

PVC DIN FITTING FEMALE ELBOW

pvc din fitting female elbow is a pipe fitting used to connect two threaded fittings of the same diameter, to form an angle of 90 degrees. PVC-U MM sized fittings are available in sizes from 20mm to 250mm and in a choice of pressure ratings from 6 Bar to 16 bar. Manufactured in accordance with EN1452/2 and DIN 8063 all fittings are WRAS approved for use with potable water.

By Read more...
DIN PVC FITTING REDUCING ELBOW
19 Aug

PVC DIN FITTING REDUCING ELBOW

pvc din fitting reducing Elbow is a pipe fitting used to connect two pieces of pipe of the different diameter to form an angle of 90 degrees. PVC-U MM sized fittings are available in sizes from 20mm to 250mm and in a choice of pressure ratings from 6 Bar to 16 bar. Manufactured in accordance with EN1452/2 and DIN 8063 all fittings are WRAS approved for use with potable water.

By Read more...
PVC FITTING 90 DEG ELBOW DIN
19 Aug

PVC DIN FITTING 90 DEG ELBOW

pvc din fitting 90 Degree Elbow is a pipe fitting used to connect two pieces of pipe of the same diameter to form an angle of 90 degrees. PVC-U MM sized fittings are available in sizes from 20mm to 250mm and in a choice of pressure ratings from 6 Bar to 16 bar. Manufactured in accordance with EN1452/2 and DIN 8063 all fittings are WRAS approved for use with potable water.

By Read more...